- Changing the shooting mode.
WhiteBalance
The whke balance function helps you to accurately reproduce colors
under different lighting conditions so that wMte objects will always look
truly whke in your recordings.
Operating modes:
1
* When you select [_a_ Custom WB], set the custom white balance with the foF
lowing procedure before touching [X].
To set the custom white balance
Point the camcorder at a white object, so it fills the whole screen,
and touch [Set WB].
When the adjustment is completed, _.%stops flashing and disappears.
The camcorder will retain the custom white balance even if you turn it off.
Options (_ Default value)
[AWBAutomaUc]* The camcorder automatically sets the white bal-
ance for natural looking colors,
['_.'- Daylight] To record outdoors,
[',,6,-'-Tungsten] To record under tungsten and tungsten-type
(3-wavelength) fluorescent lighting,
[_._.aCustom WB] Use the custom white balance setting to make
white subjects appear white under colored lighting,
(_ NOTES
• When you select the custom white balance:
- Set %d #_ [Zoom Type] (CJ_48) to [_ Optical].
- Reset the white balance when you change locations or the lighting or
other conditions change.
Advanced Shoot ng * 83