Name: Canon XA55
Brand: Canon
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Preparing the Camcorder

Using the LCD Screen

Open the LCD panel 90 degrees and adjust the viewing

angle.

NOTES

• You can adjust the brightness of the LCD screen with the > [£ Display Setup] > [LCD Brightness]

and [LCD Backlight] settings. When the camcorder is on, you can also press and hold the DISP button for

more than 2 seconds to change the [LCD Backlight] setting between bright and normal or from dim to normal.

• Adjusting the brightness does not affect the brightness of recordings.

• Using a brighter setting will shorten the effective usage time of the battery pack.

• When the LCD panel is rotated 180 degrees toward the subject, you can use the > [£ Display

Setup] > [LCD Mirror Image] setting to flip the screen's image horizontally so it shows a mirror image of the

subject.

• For details about how to take care of the LCD screen, refer to Safety Instructions and Handling Precautions

(A 129), Cleaning (A 133).

Using the Viewfinder

Adjust the position of the viewfinder to a comfortable angle. You can also adjust the diopter, if necessary.

1 Turn on the camcorder (A 25) and close the LCD panel.

2 Pull out the viewfinder and adjust the viewing angle.

3Adjust the viewfinder using the dioptric adjustment lever.

햲

햳

햲

햴

Dioptric adjustment

lever

Other manuals for Canon XA55

Questions and Answers:

Need help?

Do you have a question about the Canon XA55 and is the answer not in the manual?

General