Name: Canon Xsi
Brand: Canon
Rating: 4 (1 reviews)

To Next Page

To Previous Page

121

Dust which could not be removed by the automatic sensor cleaning can

be removed manually with a blower, etc.

The surface of the image sensor is extremely delicate. If the

sensor needs to be cleaned directly, having it done by a Canon

Service Center is recommended.

Before cleaning the sensor, detach the lens from the camera.

Select [Sensor cleaning].

Under the [6] tab, select [Sensor

cleaning], then press <0>.

Select [Clean manually].

Select [Clean manually], then press

<0>.

Select [OK].

Select [OK], then press <0>.

X In a moment, the mirror will lockup

and the shutter will open.

End the cleaning.

Set the power switch to <2>.

3 Manual Sensor CleaningN

For the power source, using the AC Adapter Kit ACK-E5 (sold

separately) is recommended.

If you use the battery, make sure it is fully recharged. If a battery grip with

size-AA batteries is attached, manual sensor cleaning will not be

possible.

H73_06.fm Page 121 Monday, November 12, 2007 3:41 PM

Questions and Answers:

Need help?

Do you have a question about the Canon Xsi and is the answer not in the manual?

Canon Xsi Specifications

General