Canon ZR850 User Manual

-=o®.GettingStarted
Getting Started
Charging the Battery Pack
The camcorder can be powered with a
battery pack or directly using the compact
power adapter. Charge the battery pack
before use.
Remove the battery
terminal cover before
attaching the battery
BATT. switch
1 Turn off the camcorder.
2 Attach the battery pack to the
camcorder.
• Press the battery pack lightly and
slide it down until it clicks.
CHARGE
indicator
DC tN
terminal
3 Plug the compact power adapter
into a power outlet,
4 connectthecompactpoweradapter
to the camcorder's DC IN terminal,
• The CHARGE indicator starts
flashing. The indicator will stay on
when the charging is completed.
• You can also use the compact power
adapter without attaching a battery
pack.
• When the compact power adapter is
connected, even if a battery is
attached its power will not be
consumed.
ONCE THE BATTERY IS FULLY CHARGED
1 Disconnect the compact power
adapter from the camcorder.
2 Unplug the compact power adapter
from the power outlet,
TO REMOVE THE BATTERY PACK
Press _BATT.I to release the battery
pack. Lift the battery pack and then
pull it out.
II

Canon ZR850 Specifications

General

Type	Camcorder
Optical Zoom	20x
Video Resolution	720 x 480
Camcorder Media Type	MiniDV
Sensor	CCD
Viewfinder	Color Viewfinder
Focus	Auto/Manual
Image Sensor	1/6 inch CCD
Optical Sensor Size	1/6 inch
Effective Pixels	Approx. 680, 000 pixels
Video Recording Format	DV
Image Stabilization	Electronic
Microphone	Stereo
Interface	USB 2.0
Battery	Lithium-Ion Battery Pack
LCD Screen Size	2.7-inch