Need help?Do you have a question about the Canopus ADVC-1000 and is the answer not in the manual?
Legal restrictions on copying and use of copyrighted material.
Details the limited warranty period, terms, and conditions for the ADVC-1000.
Covers general dangers, health precautions, and environmental restrictions for safe operation.
Precautions regarding static electricity, disassembly, voltage, power supply, and cord handling.
Highlights potential for bodily harm, hardware damage, or data loss from specific conditions.
Guidelines for proper setup, ventilation, and product usage.
FCC and CE notices, along with the Declaration of Conformity.
Information about the ADVC-1000 User Manual and where to find additional details.
Overview of the manual's content covering installation and functionality.
Preview of Chapter 1 content and contact information.
Lists all items included in the ADVC-1000 package.
Details the digital-to-digital conversion, synchronized signals, and studio adaptability.
Identifies and describes the controllers and indicators on the ADVC-1000 front panel.
Explains the function and status indication of the Mode indicator and STATUS LED.
Details the connectors and their functions on the rear panel of the ADVC-1000.
Explains the information shown on the ADVC-1000's LCD screen for different modes.
Describes the deck status indicators for 9-pin remote control operation.
Explains the display format for DV output time code, including NTSC and PAL.
Details DV audio input formats and channel configurations for SDI to DV conversion.
Specifies the output destination for digital audio signals in DV to SDI mode.
Refers to the 9-pin remote control deck status explanation from SDI to DV mode.
Explains the DV input time code display and its formats for NTSC and PAL.
Shows information about current settings for analog monitor audio and time code input.
Describes the output options for analog monitor audio channels.
Selects the method for reading time code from a deck in SDI to DV mode.
Explains LTC and DVITC acquisition via remote connector and LTC input.
Explains how to set the video standard (NTSC/PAL) via DIP switch or menu.
Explains time code error messages for DVITC, LTC, and TC inputs.
Details error messages related to SDI input and REF input signals.
Explains AES/EBU audio input detection errors for different channels.
Provides solutions for jitter attenuation and selected audio setting issues.
Shows a diagram for connecting the ADVC-1000 in a system-integrated setup.
Provides quick settings for DV to SDI and SDI to DV modes with reference pages.
Steps for importing SDI data to a PC using the ADVC-1000 and editing software.
Steps for exporting PC-edited DV data to a VCR for recording onto tape.
Explains the function of the Select key for navigating and changing menu items.
Lists menu item ranges and their corresponding settings categories.
Settings for DV audio format used during DV encoding.
Settings for digital audio input during SDI to DV conversion.
Settings for digital audio output from the ADVC-1000.
Settings for outputting analog audio signals to monitor connectors.
Function to automatically stop SDI output in SDI to DV mode.
Control process to stop DV output based on SDI input status.
Settings for aspect ratio of the DV stream output in SDI to DV mode.
Sets the type of video signal output from the analog monitor output connector.
Sub-menu for selecting the video standard (NTSC/PAL) and setup level.
Selects the method for reading time code from a deck in SDI to DV mode.
Settings for inserting DVITC into SDI output in DV to SDI mode.
Sets line for inserting DVITC in SDI output and reading DVITC from SDI input.
Settings for external sync operation, including disable, enable, and advanced modes.
Selects the source for the sync signal during external synchronization.
Sets video output delay relative to the external sync input.
Sets audio output delay relative to video output when external sync is enabled.
Settings for deck control via the 9-pin remote connector.
Enables or disables the Mode switch for front panel control.
Selects the color bar output mode for various signal types.
Selects the testing audio signal level for SG audio.
Adjusts clock settings for IEEE1394 communication.
Enables or disables the SDI output jitter reduction function.
Enables or disables cycle master acquisition.
Sets the horizontal resampling filter for Cb/Cr signal in NTSC mode.
Selects the type of AV/C transaction when an AV/C command is received.
Sets the maximum communication speed for data rate capping.
Displays firmware version numbers.
Restores settings to factory default values.
General| Video Inputs | 1 x Composite, 1 x S-Video |
|---|---|
| Audio Inputs | 2 x RCA (L/R) |
| Digital Video Format | DV |
| DV Interface | IEEE 1394 (FireWire) |
| Supported Standards | NTSC, PAL |
| A/D Conversion | 10-bit |
| D/A Conversion | 10-bit |
| Video Standards | NTSC, PAL |
| Audio Sampling Rate | 48 kHz |
| Audio Quantization | 16-bit |
| Weight | 1.2 kg |
| Power Supply | AC adapter (included) |
To Next Page
