Canton Smart SUB 8 - Page 22

22
English
Wireless connection with Smart Soundbox 3:
Note:
• Before connecting the Smart Sub 8 to the Smart Soundbar, please make sure
that the Smart Sub 8 is not connected to the power supply.
1
Press the input select button „ “ for at least 3 seconds.
2
Use the „+“ or „-“ button to navigate to the Wireless Setup [WIS] menu and
press the „ “ play/pause button to confirm.
3
Select Pair Wireless Speakers [WSP] and confirm with the Play/Pause button
„ “.
4
The Pair Wireless Speakers menu appears and [MFL] appears on the display
(MFL = Master Front Left).
5
Press the play/pause button „ “.
6
Use the „+“ or „-“ button to select the [SUB] subwoofer you want to pair.
7
Now press play/pause button „ “. The status indicator will change to „Pair“
[PIR].
8
Connect the Smart Sub 8 you want to connect to the mains and switch it on.
9
Approximately 10 - 20 seconds after the subwoofer is turned on, the status
changes to „connected“ and [CON] is displayed.