Canyon Cottage Colors Step Bunk Unit

To Next Page

CANYON FURNITURE COMPANY

DO NOT COMPLETELY TIGHTEN ALL BOLTS UNTIL ALL COMPONENTS ARE CONNECTED.

CONFIGURATION TYPE # 1CONFIGURATION TYPE # 1

(28-160) COTTAGE COLORS COLLECTION STEP BUNK UNIT ASSEMBLY INSTRUCTIONS

TWO PEOPLE ARE NEEDED TO ASSEMBLE.

READ ALL THE INSTRUCTIONS AND IDENTIFY ALL COMPONENTS AND CHOOSE YOUR CONFIGURATION AND BE SURE YOU HAVE ALL PARTS

THANK YOU FOR YOUR PURCHASE !

PLEASE CONTACT YOUR RETAIL STORE WITH SERVICE OR PARTS REPLACEMENT REQUESTPLEASE CONTACT YOUR RETAIL STORE WITH SERVICE OR PARTS REPLACEMENT REQUEST

CONFIGURATION TYPE # 2

TOOLS NEEDED

PHILIPS HEADSCREWDRIVER (NOT INCLUDED)

5MM ALLEN WRENCH (INCLUDED)

TO ASSEMBLE THIS STEP BUNK

UNIT REQUIRES TWO PERSONS

28-160 STEP BUNK UNIT

28-706 1 PC BUNK BED END TWIN

28-730 6 PIECE RAILS

100-645 TWIN SLATS (2 PCS)

OPTION #1

OPTION #2

OPTION #1

28-160 STEP BUNK UNIT

28-706 1 PC BUNK BED END TWIN

28-730 6 PIECE RAILS

28-782 FULL EXTENDER KIT

100-645 TWIN SLATS

100-646 FULL SLATS

28-160 STEP BUNK UNIT

28-207 6 DRAWER LOFT DRESSER

28-766 LOFT HUTCH

28-705 TOP BUNK BED

28-730 6 PIECE RAILS

28-709 FULL BOTTOM HDBD&FTBD

28-735 RAIL CAP

100-645 TWIN SLATS

100-646 FULL SLATS

28-160 STEP BUNK UNIT

28-603 LOFT DESK

28-766 LOFT HUTCH

28-705 TOP BUNK BED

28-730 6 PIECE RAILS

28-707 TWIN BOTTOM HDBD&FTBD

100-645 TWIN SLATS (2 PCS)

OPTION #2

OPTION #3

28-160 STEP BUNK UNIT

28-603 LOFT DESK

28-766 LOFT HUTCH

28-705 TOP BUNK BED

28-730 6 PIECE RAILS

28-709 FULL BOTTOM HDBD&FTBD

28-735 RAIL CAP

100-645 TWIN SLATS

100-646 FULL SLATS

28-160 STEP BUNK UNIT

28-207 6 DRAWER LOFT DRESSER

28-766 LOFT HUTCH

28-705 TOP BUNK BED

28-730 6 PIECE RAILS

28-707 TWIN BOTTOM HDBD&FTBD

100-645 TWIN SLATS (2 PCS)

OPTION #4

WARNING:

THE BED SLATS WILL NO SUPPORT A MATTRES ALONE, A SLAT PACK

OR A BUNKIE BOARD IS REQUIRED FOR PROPER SAFETY.

(NOT INCLUDED)

REV 02 04/01/2019

PAGE 1 OF 5 KIS01180-0

Need help?

Do you have a question about the Canyon Cottage Colors Step Bunk Unit and is the answer not in the manual?

Overview

Function Description
Important Technical Specifications
Hardware Specifications (common across configurations)
Mattress and Foundation Specifications
Usage Features
Maintenance Features

The Canyon Furniture Company (28-160) Cottage Colors Collection Step Bunk Unit is a versatile and configurable bunk bed system designed for children's rooms. It offers multiple configurations to adapt to different room layouts and storage needs, making it a flexible solution for maximizing space. The assembly process requires two people and emphasizes not fully tightening bolts until all components are connected, ensuring proper alignment before final securing.

Function Description:

The primary function of this product is to provide a multi-level sleeping arrangement, specifically a step bunk bed, which integrates storage or desk options. It serves as a space-saving solution, combining a bed with functional elements like drawers, desks, or hutches, depending on the chosen configuration. The "step bunk" design implies a staircase-like structure for accessing the upper bunk, which can also incorporate storage within the steps themselves, though this is not explicitly detailed in the provided pages. The system is designed to be highly modular, allowing users to select specific components to build a bunk bed that best suits their requirements.

Important Technical Specifications:

The core unit is the 28-160 Step Bunk Unit. Various components can be combined with the core unit:

28-706 1 PC Bunk Bed End Twin: A single-piece end for a twin-sized bunk bed.
28-730 6 Piece Rails: A set of six rails for the bed frame.
28-782 Full Extender Kit: Used to extend the bed to a full size.
100-645 Twin Slats: Slats for a twin-sized mattress.
100-646 Full Slats: Slats for a full-sized mattress.
28-207 6 Drawer Loft Dresser: A dresser with six drawers designed to fit under a loft bed or integrated into the bunk system.
28-766 Loft Hutch: A hutch component for a loft bed, likely providing shelving or additional storage.
28-705 Top Bunk Bed: The upper bunk bed frame.
28-709 Full Bottom HDBD&FTBD: Full-sized headboard and footboard for the bottom bunk.
28-735 Rail Cap: A cap for the bed rails, likely for aesthetic or safety purposes.
28-603 Loft Desk: A desk component designed to fit under a loft bed or integrated into the bunk system.
28-707 Twin Bottom HDBD&FTBD: Twin-sized headboard and footboard for the bottom bunk.

Hardware Specifications (common across configurations):

80MM Flat Head Bolts (E): 24 pieces.
5/16"-18 X 5/8" Cross Dowel Nuts Black (F): 24 pieces. These nuts are crucial for securing components and require careful alignment to ensure the groove is horizontal.
5MM Allen Wrench (G): Included for tightening bolts.
1 1/4" Screws (I): 8 pieces, used for fastening slats.
23MM Connector Bolts (L): 8 pieces, used with the Full Extender Kit.
Cap Nuts (M): 8 pieces, used with the Full Extender Kit.
Metal Plates (K): 2 pieces, used with the Full Extender Kit.
4" Metal Dowel Pins (S): Used for aligning and securing loft dressers, desks, and hutches.

Mattress and Foundation Specifications:

Upper & Lower Bunk Bed (Twin): Designed for a mattress 74" to 75" long and 37 1/2" to 38 1/2" wide.
Lower Bunk Bed (Full): Designed for a mattress 74" to 75" long and 52 1/2" X 53 1/2" wide.
Bunkie Board (Twin): Required, 37 1/2" wide X 74" long.
Bunkie Board (Full): Required, 52 1/2" wide X 74" long.
Combined Thickness: Mattress and foundation combined must not exceed 10", and the mattress surface must be at least 5" below the upper edge of guardrails.

Usage Features:

Configurability: The system offers multiple configurations (Type #1 with two options, Type #2 with four options) to cater to different user needs, allowing for a twin-over-twin, twin-over-full, or twin-over-full with integrated dresser/desk and hutch.
Guard Rail Flexibility: The guard rail can be installed on either the left or right side of the step bunk unit, providing adaptability to room layouts. This requires removing and re-attaching the guard rail using a Phillips screwdriver.
Integrated Storage/Workspace: Configurations include options for a 6-drawer loft dresser or a loft desk, maximizing the utility of the space beneath the upper bunk.
Step Bunk Access: The "step bunk" design implies easy and safe access to the upper bunk, potentially with integrated storage in the steps, although the steps themselves are not detailed as separate components in the list.
Safety Focus: Emphasizes the importance of using a slat pack or bunkie board for proper safety, as bed slats alone will not support a mattress. It also includes comprehensive safety warnings regarding mattress size, guardrail use, age restrictions, and prevention of entrapment.

Maintenance Features:

Periodic Checks: Users are advised to periodically check and ensure that guardrails, ladders, and other components are in their proper position, free from damage, and that all connectors are tight. This is a crucial maintenance step to ensure ongoing safety and stability.
Replacement Parts: The manual explicitly states that replacement parts, including additional guardrails, may be obtained from Canyon Furniture Company dealers. This ensures the longevity and continued safe use of the bunk bed system.
Assembly Guidance: The instruction to "DO NOT COMPLETELY TIGHTEN ALL BOLTS UNTIL ALL COMPONENTS ARE CONNECTED" is a key assembly feature that aids in proper alignment and reduces the likelihood of stripped threads or misaligned parts, contributing to the overall structural integrity and ease of future maintenance.
Tool Provision: A 5MM Allen wrench is included with the hardware, simplifying the assembly process for the user. A Phillips head screwdriver is required but not included.
Rail Cap (28-735): For full bottom headboards and footboards, a rail cap is recommended. This component likely protects the rails and enhances durability, potentially reducing wear and tear.