Instruction manual C2101BG 25
Please keep this instruction manual for future reference
REMOVING THE GLASS PANELS
The oven door is made up of 2 panes of glass with vents at the top and bottom. When the oven
is operating, air is circulated through the door to keep the outer pane cool. If condensation has
worked its way in between the glass panes, the door can be dismantled in order to clean in
between the panes.
Remove the door as per above instructions below and place it on a protective surface (e.g. on a
table cloth) to prevent it getting scratched. The door handle should line up with the edge of the
table. Make sure the glass lies at to avoid breaking the glass during cleaning.
1. Press the button (A) on left and right side of door, take out top rail. (Fig.1)
2. Take out inner glass slowly, following the direction of the arrow (B) then (C) (Fig.2)
Clean the glass panes and other parts with a damp microbre cloth or a clean sponge and a
solution of hot water with a little washing-up liquid. Wipe dry using a soft cloth and re-assemble
following the above instructions in reverse.
B
B
C
A
Fig.1 Fig.2
To Next Page
Loading...
