EasyManua.ls Logo

Caple CM130 - Page 21

Caple CM130
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
21
Please keep this instruction manual for future reference
Instruction manual CM130
COMBINATION COOKING:
Press “Micro/Grill/Combi” the LED will display”P100” and press “Micro/Grill/Combi” a few
times or turn the
Operation Instructions
1) Press " " once, the screen display "P100".
2) Turn " " to adjust the hour figures, the input time should be within 0--23.
3) Press " ", the minute figures will flash.
3) Press " " to confirm, and the screen displays "P 80".
4) Turn " " to adjust the cooking time until the oven displays "20:00".
5) Press " " to start cooking .
1. Setting the clock
When the microwave oven is switched on, the LED will display "0:00", the buzzer will ring once.
1) Press " " twice to select clock function, the hour figures will flash.
4) Turn " " to adjust the minute figures, the input time should be within 0--59.
5) Press "
" to finish setting the clock. ":" will flash, and the time will illuminate.
Note: the step quantities for the adjustment time of the coding switch are as follow:
0---1 min : 5 seconds
1---5 min : 10 seconds
5---10 min : 30 seconds
10---30 min : 1 minute
30---95 min : 5 minutes
2) Press " " once again or turn" " to choose 80% microwave
power.
Note: 1) If the clock is not set, the oven will not function when powered up.
2) ", the oven
During the process of setting the clock, if you press "
will go back to the previous status automatically.
2.
Microwave Cooking
Press " " the LED will display "P100".Press " "
a few times or turn " "to choose the power you want, and "P100", "P80" "P50",
"P30" or "P10" will display for each added press. Then press" "
to confirm, and turn " " to set the cooking time from 0:05 to 95:00. Press
" " again to start cooking.
Example: If you want to use 80% microwave power to cook for 20 minutes, you can
operate the oven as the following steps.
Micro./Grill/Combi.
Start/+30Sec./Confirm
Start/+30Sec./Confirm
Start/+30Sec./Confirm
Stop/Clear
Start/+30Sec./Confirm
Micro./Grill/Combi.
Micro./Grill/Combi.
Micro./Grill/Combi.
Kitchen Timer/Clock
Kitchen Timer/Clock
Kitchen Timer/Clock
14
“ to choose the power you want, and “P100, “P80” “P50” “P30”, “P10”
“G”,”C-1” or “C-2” will display for each added press. Press “Start/+30Sec/Confirm” to confirm
and turn “
Operation Instructions
1) Press " " once, the screen display "P100".
2) Turn " " to adjust the hour figures, the input time should be within 0--23.
3) Press " ", the minute figures will flash.
3) Press " " to confirm, and the screen displays "P 80".
4) Turn " " to adjust the cooking time until the oven displays "20:00".
5) Press " " to start cooking .
1. Setting the clock
When the microwave oven is switched on, the LED will display "0:00", the buzzer will ring once.
1) Press " " twice to select clock function, the hour figures will flash.
4) Turn " " to adjust the minute figures, the input time should be within 0--59.
5) Press "
" to finish setting the clock. ":" will flash, and the time will illuminate.
Note: the step quantities for the adjustment time of the coding switch are as follow:
0---1 min : 5 seconds
1---5 min : 10 seconds
5---10 min : 30 seconds
10---30 min : 1 minute
30---95 min : 5 minutes
2) Press " " once again or turn" " to choose 80% microwave
power.
Note: 1) If the clock is not set, the oven will not function when powered up.
2) ", the oven
During the process of setting the clock, if you press "
will go back to the previous status automatically.
2.
Microwave Cooking
Press " " the LED will display "P100".Press " "
a few times or turn " "to choose the power you want, and "P100", "P80" "P50",
"P30" or "P10" will display for each added press. Then press" "
to confirm, and turn " " to set the cooking time from 0:05 to 95:00. Press
" " again to start cooking.
Example: If you want to use 80% microwave power to cook for 20 minutes, you can
operate the oven as the following steps.
Micro./Grill/Combi.
Start/+30Sec./Confirm
Start/+30Sec./Confirm
Start/+30Sec./Confirm
Stop/Clear
Start/+30Sec./Confirm
Micro./Grill/Combi.
Micro./Grill/Combi.
Micro./Grill/Combi.
Kitchen Timer/Clock
Kitchen Timer/Clock
Kitchen Timer/Clock
14
“ to set cooking time from 0:05 to 95:00.
Press “Start/+30Sec/Confirm” again to start cooking.
EXAMPLE:
If you want to use 55% microwave power and 45% grill power(C-1) to cook for 10 minutes, you
can operate the oven as the following steps.
Press “Micro/Grill/Combi” once, the screen display “P100”.
Press “Micro/Grill/Combi” a few times or turn
Operation Instructions
1) Press " " once, the screen display "P100".
2) Turn " " to adjust the hour figures, the input time should be within 0--23.
3) Press " ", the minute figures will flash.
3) Press " " to confirm, and the screen displays "P 80".
4) Turn " " to adjust the cooking time until the oven displays "20:00".
5) Press " " to start cooking .
1. Setting the clock
When the microwave oven is switched on, the LED will display "0:00", the buzzer will ring once.
1) Press " " twice to select clock function, the hour figures will flash.
4) Turn " " to adjust the minute figures, the input time should be within 0--59.
5) Press "
" to finish setting the clock. ":" will flash, and the time will illuminate.
Note: the step quantities for the adjustment time of the coding switch are as follow:
0---1 min : 5 seconds
1---5 min : 10 seconds
5---10 min : 30 seconds
10---30 min : 1 minute
30---95 min : 5 minutes
2) Press " " once again or turn" " to choose 80% microwave
power.
Note: 1) If the clock is not set, the oven will not function when powered up.
2) ", the oven
During the process of setting the clock, if you press "
will go back to the previous status automatically.
2.
Microwave Cooking
Press " " the LED will display "P100".Press " "
a few times or turn " "to choose the power you want, and "P100", "P80" "P50",
"P30" or "P10" will display for each added press. Then press" "
to confirm, and turn " " to set the cooking time from 0:05 to 95:00. Press
" " again to start cooking.
Example: If you want to use 80% microwave power to cook for 20 minutes, you can
operate the oven as the following steps.
Micro./Grill/Combi.
Start/+30Sec./Confirm
Start/+30Sec./Confirm
Start/+30Sec./Confirm
Stop/Clear
Start/+30Sec./Confirm
Micro./Grill/Combi.
Micro./Grill/Combi.
Micro./Grill/Combi.
Kitchen Timer/Clock
Kitchen Timer/Clock
Kitchen Timer/Clock
14
“ to choose combi 1 mode.
Press “Start/+30Sec/Confirm” to confirm, and the screen displays “C-1”.
Turn “
Operation Instructions
1) Press " " once, the screen display "P100".
2) Turn " " to adjust the hour figures, the input time should be within 0--23.
3) Press " ", the minute figures will flash.
3) Press " " to confirm, and the screen displays "P 80".
4) Turn " " to adjust the cooking time until the oven displays "20:00".
5) Press " " to start cooking .
1. Setting the clock
When the microwave oven is switched on, the LED will display "0:00", the buzzer will ring once.
1) Press " " twice to select clock function, the hour figures will flash.
4) Turn " " to adjust the minute figures, the input time should be within 0--59.
5) Press "
" to finish setting the clock. ":" will flash, and the time will illuminate.
Note: the step quantities for the adjustment time of the coding switch are as follow:
0---1 min : 5 seconds
1---5 min : 10 seconds
5---10 min : 30 seconds
10---30 min : 1 minute
30---95 min : 5 minutes
2) Press " " once again or turn" " to choose 80% microwave
power.
Note: 1) If the clock is not set, the oven will not function when powered up.
2) ", the oven
During the process of setting the clock, if you press "
will go back to the previous status automatically.
2.
Microwave Cooking
Press " " the LED will display "P100".Press " "
a few times or turn " "to choose the power you want, and "P100", "P80" "P50",
"P30" or "P10" will display for each added press. Then press" "
to confirm, and turn " " to set the cooking time from 0:05 to 95:00. Press
" " again to start cooking.
Example: If you want to use 80% microwave power to cook for 20 minutes, you can
operate the oven as the following steps.
Micro./Grill/Combi.
Start/+30Sec./Confirm
Start/+30Sec./Confirm
Start/+30Sec./Confirm
Stop/Clear
Start/+30Sec./Confirm
Micro./Grill/Combi.
Micro./Grill/Combi.
Micro./Grill/Combi.
Kitchen Timer/Clock
Kitchen Timer/Clock
Kitchen Timer/Clock
14
“ to adjust the cooking time until the oven displays “10:00”.
Press “Start/+30Sec/Confirm” to start cooking .
NOTE:
If half the grilling time passes and the oven sounds twice, this is normal. In order to have a better
effect when grilling food, you should turn the food over, close the door, and then press
”Start/ +30Sec./ Confirm” to continue cooking.
If there is no operation, the oven will continue cooking.
QUICK START:
In standby mode, press “Start/+30Sec/Confirm” to start cooking with 100% power, each added
press will increase 30 seconds cooking time up to 95 minutes.
In microwave, grill cooking or time defrost state, each press of “Start/+30Sec/Confirm” can
increase 30 seconds of cooking time.
In standby mode, turn “
Operation Instructions
1) Press " " once, the screen display "P100".
2) Turn " " to adjust the hour figures, the input time should be within 0--23.
3) Press " ", the minute figures will flash.
3) Press " " to confirm, and the screen displays "P 80".
4) Turn " " to adjust the cooking time until the oven displays "20:00".
5) Press " " to start cooking .
1. Setting the clock
When the microwave oven is switched on, the LED will display "0:00", the buzzer will ring once.
1) Press " " twice to select clock function, the hour figures will flash.
4) Turn " " to adjust the minute figures, the input time should be within 0--59.
5) Press "
" to finish setting the clock. ":" will flash, and the time will illuminate.
Note: the step quantities for the adjustment time of the coding switch are as follow:
0---1 min : 5 seconds
1---5 min : 10 seconds
5---10 min : 30 seconds
10---30 min : 1 minute
30---95 min : 5 minutes
2) Press " " once again or turn" " to choose 80% microwave
power.
Note: 1) If the clock is not set, the oven will not function when powered up.
2) ", the oven
During the process of setting the clock, if you press "
will go back to the previous status automatically.
2.
Microwave Cooking
Press " " the LED will display "P100".Press " "
a few times or turn " "to choose the power you want, and "P100", "P80" "P50",
"P30" or "P10" will display for each added press. Then press" "
to confirm, and turn " " to set the cooking time from 0:05 to 95:00. Press
" " again to start cooking.
Example: If you want to use 80% microwave power to cook for 20 minutes, you can
operate the oven as the following steps.
Micro./Grill/Combi.
Start/+30Sec./Confirm
Start/+30Sec./Confirm
Start/+30Sec./Confirm
Stop/Clear
Start/+30Sec./Confirm
Micro./Grill/Combi.
Micro./Grill/Combi.
Micro./Grill/Combi.
Kitchen Timer/Clock
Kitchen Timer/Clock
Kitchen Timer/Clock
14
“ left to set cooking time with 100% microwave power, then press
“Start/+30Sec/Confirm” to start cooking.

Related product manuals