EasyManua.ls Logo

Caple CM460 - Drip Basin Cleaning; Emptying Coffee Grounds Tray; Troubleshooting Common Issues; Water Tank Troubleshooting

Caple CM460
15 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
30
GB
31
Drip basin
Remove the drip basin from the machine as shown in the
following gures.
Make sure to periodically empty the basin to avoid
liquid spills that could dirty and ruin the furniture below.
The basin and relative metal grill can be washed in the
dishwasher.
Emptying used coffee grounds
To open the door of the compartment with the tray, you
must rst remove the drip basin as described in Figures
17.4, 17.5 and 17.6.
Remove the tray, empty the
coffee grounds and wash
it with hot water or in the
dishwasher.
Put the “used” coffee ground
tray back in its compartment.
ATTENTION: avoid emptying the grounds
collection tray with the machine on to avoid
accidental contact with hot parts.
Water tank
• If the machine has not been used in a long time, we
recommend changing the water in the tank
• Periodically clean the water tank of any lime
encrustations.
• The tank can be washed in the dishwasher.
• If using the Brita decalcifying lter, we recommend
replacing the lter every 2000 espresso coffees or at
least every six months.
17. TROUBLESHOOTING
The operator should make sure that the problem is not
caused by:
- No electricity
- No water in the tank
- No coffee in the machine
- Incorrect closure of the access door to the coffee
ground tray.
For any other causes, have the machine checked by a
service centre.

Related product manuals