Instruction manual Di642 15
Please keep this instruction manual for future reference
1. Remove the lower basket and unscrew the reservoir cap.
2. Place the end of the funnel (supplied) into the hole and pour in about 1.5kg of dishwasher salt.
3. Fill the salt container to its maximum limit with water, It is normal for a small amount of water
to come out of the salt container.
4. After filling the container, screw back the cap tightly.
5. The salt warning light will turn off after the salt container has been filled with salt.
6. Immediately after filling the salt into the salt container, a washing programme should be started
(we suggest to use a short programme). Otherwise the filter system, pump or other important
parts of the machine may be damaged by salty water.
NOTE:
› The salt container must only be refilled when the salt warning light ( ) in the control panel
comes on. Depending on how well the salt dissolves, the salt warning light may still be on
even though the salt container is filled.
› If salt has spilled, run a soak or quick programme to remove it.
To Next Page
Loading...
