Instruction manual Di642 35
Please keep this instruction manual for future reference
INSTALLATION INSTRUCTIONS
ATTENTION:
We strongly recommend the installation of the pipes and electrical connections should be made by
a qualified engineer or similarly qualified professional.
WARNING:
Electrical Shock Hazard. Disconnect electrical power before installing dishwasher. Failure to do so
can result in death or electrical shock.
INSTALLATION PREPARATION
The installation position of dishwasher should be near the existing inlet and drain hoses and
power cord. One side of the cabinet sink should be chosen to facilitate the connection of drain
hoses of the dishwasher.
NOTE:
Please check the accompanying installation accessories (fixing for aesthetic door panel).
ELECTRICAL CONNECTION
WARNING:
For personal safety:
› Do not use an extension cord or an adapter plug with this appliance.
› Do not, under any circumstances, cut or remove the earthing connection from the power cord.
ELECTRICAL REQUIREMENTS
Please look at the rating label to know the rating voltage and connect the dishwasher to the
appropriate power supply. Use the required 10 amp fuse, time delay fuse or circuit breaker
recommended and provide separate circuit serving only this appliance.
To Next Page
Loading...
