EasyManua.ls Logo

Caple DI642 - Loading the Salt into the Softner

Caple DI642
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Instruction manual Di64214 Please keep this instruction manual for future reference
LOADING THE SALT INTO THE SOFTENER
Always use salt intended for use with dishwashers.
The salt container is located beneath the lower basket and should be filled as explained in
the following:
ATTENTION:
Only use salt specifically designed for the use in dishwasher. Every other type
of salt not specifically designed for the use in a dishwasher, especially table salt, will damage
the water softener. In case of damages caused by the use of unsuitable salt the manufacturer
does not give any warranty nor is liable for any damages caused.
Only fill with salt just before running a cycle. This will prevent any grains of salt or salty water,
which may have been spilled, remaining on the bottom of the machine for any period of time,
which may cause corrosion.
Contact your local water board for information on the hardness of your water supply.
NOTE
The hardness of the water varies from place to place. If hard water is used in the dishwasher,
deposits will form on the dishes and utensils.
The appliance is equipped with a special softener that uses a salt container specifically
designed to eliminate lime and minerals from the water.

Related product manuals