Instruction manual Di642 17
Please keep this instruction manual for future reference
ADJUST RINSE AID DISPENSER
To achieve a better drying performance with limited rinse aid, the dishwasher is designed to adjust
the consumption by user. Follow the below steps.
1. Open the door, switch on the appliance.
2. Within 60 seconds after step 1, press the Programme button for more than 5 seconds,
and then press the Delay button, the rinse aid light will blink.
3. Press the Programme button to select your desired setting. The settings will change in the
following sequence: D1->D2->D3->D4->D5->D1. The higher the number, the more rinse aid
the dishwasher uses.
4. If there is no operation for 5 seconds, the setting will be successful.
NOTE:
Press the power button to cancel the setting.
To Next Page
Loading...
