Instruction manual Di64246 Please keep this instruction manual for future reference
TYPE PROBLEM POSSIBLE CAUSES WHAT TO DO
UNSATISFACTORY DRYING RESULTS
The dishes are
not drying
Improper loading Load the dishwasher as suggested in the directions.
Too little Rinse Aid Increase the amount of Rinse Aid/refill the Rinse Aid dispenser.
Dishes are removed
too soon
Empty the lower basket first and then the upper one. This will avoid
water dripping from the upper basket onto the dishes in the
lower one.
Wrong programme has
been selected
In short programme the washing temperature is lower.
This also lowers cleaning performance. Choose a programme with
a long washing time.
Use of cutlery with a low-
quality coating
Water drainage is more difficult with these items. Cutlery or dishes
of this type are not suitable for washing in
the dishwasher.
CODES MEANINGS POSSIBLE CAUSES
E1 Longer inlet time.
Tap is not opened, or water intake is restricted, or
water pressure is too low.
E3
Not reaching required
temperature.
Malfunction of heating element.
E4 Overflow. Some element of the dishwasher leaks.
Ed
Failure of communication
between main PCB with
display PCB
Open circuit or break wiring for the communication.
ERROR CODES
When some malfunctions occur, the appliance will display error codes to warn you:
WARNING:
› If overflow occurs, turn off the main water supply before calling a service.
› If there is water in the base pan because of an overfill or small leak, the water should be
removed before restarting the dishwasher.
To Next Page
Loading...
