EasyManua.ls Logo

Caple RI7301 - Temperature and Freezer Settings

Caple RI7301
19 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16 17Instruction manual Ri7301 Instruction manual Ri7301Please keep this instruction manual for future reference Please keep this instruction manual for future reference
Set the knob to a low/medium
position,up to 3, for short-term storage
of food in the appliance.
Set the knob to a medium position, 3 or
4, for long-term storage of food in
the appliance.
For freezing fresh foods or a large
quantity of foods, set to 5. The appliance
will work for longer. Once the food is
fully frozen, reset the thermostat to its
original position.
SUPER FREEZE AND WINTER
SWITCH
For maximum freezing capacity, press this switch 24 hours before placing food in the freezing
compartment. In order to save energy, please turn the switch Off 24 hours after placing food in
the freezer.
When the ambient temperature outside of the appliance is low (below 16°C), use this switch to
keep your fridge above 0°C and freezer below -18°C.
NOTE:
The ambient temperature, the temperature of freshly stored food, and how often the door is
opened all affect the temperature in the appliance. If required, change the temperature setting.
TEMPERATURE SETTINGS WARNINGS
It is not recommended that you operate your fridge in environments colder than 10°C in
terms of its efficiency.
When setting the thermostat, take into consideration how often the appliance doors are
opened and closed, how much food is stored in the refrigerator, and the environment in
which the refrigerator is located.
Lamp Cover
Thermostat Knob
Super Freeze Switch /
Winter Switch
When the appliance is first switched on, allow it to run for 24 hours in order to reach
operating temperature. During this time, do not open the door and do not keep a large
quantity of food inside.
Unplug your appliance during a power cut to prevent damage to the compressor. Once
power is restored, delay plugging in your appliance for 5 to 10 minutes. This will help
prevent damage to the appliance’s components.
Your appliance is designed to operate in the ambient temperature ranges stated in the
standards, according to the climate class stated in the information label.
It is not recommended that your fridge is operated in the environments which are outside of
the stated temperature ranges. This will reduce the cooling efficiency of the appliance.
Your appliance is designed to operate in the ambient temperature (ST/N = 16°C - 38°C)
intervals stated in the standards, according to the climate class displayed on the information
label. We do not recommend operating your appliance out of the stated temperature limits
in terms of cooling effectiveness.
CLIMATE CLASS AMBIENT TEMPERATURE OC
T
Between 16 and 43 (°C)
ST
Between 16 and 38 (°C)
N
Between 16 and 32 (°C)
SN
Between 10 and 32 (°C)

Related product manuals