Caple RIL1800 - User Manual

Questions and Answers

M
mcintyrecindyAug 11, 2025
What to do if Caple RIL1800 Refrigerator shows E10 error?
- C
  Craig MortonAug 11, 2025
  If your Caple Refrigerator displays an E10 error, it's likely due to a long-term power failure or hot food being left in the fridge. First, try setting the fridge temperature to a colder setting or activating Super Cool mode; this should clear the error once the required temperature is reached. Ensure the doors remain closed to speed up the cooling process. Also, make sure the area in front of the air duct channel holes is clear, and avoid placing food too close to the sensor. If the error persists, contact Caple service.
D
Douglas NelsonAug 20, 2025
What to do if Caple RIL1800 displays E11 error?
- S
  Shawn BrockAug 21, 2025
  If your Caple Refrigerator shows an E11 error, first check if Super Cool mode is activated. If it is, try deactivating it. Next, try reducing the fridge compartment temperature. Also, verify that the vents inside the refrigerator are clear and not blocked. If the error continues, contact Caple service.
K
Kimberly ReeseAug 30, 2025
Why does my Caple RIL1800 Refrigerator display E08 error?
- W
  Walter JonesAug 30, 2025
  The E08 error on your Caple Refrigerator indicates that the power supply to the device has dropped below 170V. This is not necessarily a failure; it's a protective measure to prevent damage to the compressor. The voltage needs to return to the required levels. The warning should disappear once the voltage is adequate. If the warning persists, contact Caple service.