Caple RIL125 - Page 25

25Instruction manual RiL125Please keep this instruction manual for future reference
› Flip the lower hinge 180° (so the pin is pointing downwards) and put the pin of the hinge
into the top of the door and fix it in to place. Ensure the door is aligned horizontally and
vertically so that the seals are closed on all sides before finally tightening the top hinge pin.
› Remove the 2 door guide holders from side of the doors and fix them on to the
opposite side.
> Flip the lower hinge 180° (so the pin is pointing downwards) and put the pin of the hinge into
the top of the door and fix it in to place. Ensure the door is aligned horizontally and vertically so
that the seals are closed on all sides before finally tightening the top hinge pin.
> Remove the 2 door guide holders from side of the doors and fix them on to the opposite side.