Capron T58 - Central Seating Group; Sleeping Conversion

Living
76 Capron - 3141417 - 03/20 - EHG-0021-02EN
7
7.10 Sleeping conversion
 Depending on the model, the seating group can be different in shape
and position to the one shown here.
 Depending on the model, use a second narrow additional cushion.
These additional cushions are not standard for all models.
 Before converting the table into the bed foundation: Lift seat cushions or
fold them upwards such that the table top does not collide with the seat
cushions when moving.
7.10.1 Central seating group
Fig. 83 Prior to conversion Fig. 84 After conversion
 Converting the table to a bed foundation (see section 7.6.1)
 Remove and put aside one back cushion.
 Place one seat cushion onto the table.
 Place one back cushion flatly on the bench.
 Insert the additional cushion between back cushion and seat cushion.