△
!
Warning:
In order to protect the driving safety and avoid break the traffic law; please DO NOT operate the interface while driving.
The reversing surveillance function just is used in reversing assistance. Please check the entire surroundings while reversing.
All steps of installation should be done by the well-trained specialist.
During installation, the ignition key should be taken off and after all installation finished, connect power cable last.
Please DO NOT plug or pull the connected cables in the state of power-on, in order to avoid damaged monitor or accessory.
Install wiring in a manner in which cables will not come in contact with metal parts. The wiring may be damaged by contact with
metal parts, resulting in fire and shocks. Avoid all contact with hot surfaces when wiring the main unit. High temperatures may
damage wiring, causing shorts, arcing and fires.
Please DO NOT put the product in the damp environment or water, in order to avoid electric shock，damaged and fire accident
caused by a short circuit.
Kindly check all components are in the box when receiving the product. If anything missing, inform to the supplier/manufacturer.
Start the engine before loading, check the interface whether have function displayed, key control whether correct, the vehicle
To Next Page
Loading...
