Need help?Do you have a question about the Car-O-Liner CMI 300 Pulse Boost and is the answer not in the manual?
General| Input Voltage | 400 V |
|---|---|
| Output Current | 300 A |
| Welding Current Range | 30-300A |
| Wire Diameter | 0.8-1.2 mm |
| Protection Class | IP23 |
| Frequency | 50/60 Hz |
| Welding Process | MIG/MAG |
Guidance on proper installation and use of welding equipment as per regulations.
Ensuring safe electrical connections, insulation checks, and proper maintenance.
Precautions regarding high-frequency ignition shocks for TIG/Plasma welding.
Protecting eyes and skin from arc light and heat emissions.
Importance of ventilation and extraction for welding fumes and gases.
Measures to prevent fire hazards from sparks and combustible materials.
Awareness of noise levels and need for hearing protection.
Caution regarding dangerous areas like rotating parts and working at heights.
Guidelines for safe placement of the welding/cutting machine to prevent tipping.
Instructions for safely lifting the welding/cutting machine to prevent injury.
Requirements for installing the machine and connecting it to the mains supply.
Procedures for connecting gas supply and welding hoses.
Specifications for cable dimensions based on current and process.
Procedure for adjusting the wire brake for proper wire feed control.
Steps for assembling parts in the wire feed unit.
Managing software, licenses, and configuring torch settings.
Understanding and managing machine errors and the error log.
To Next Page
