Cardin S449 QZ2 - User Manual

Programming Manual
http://www.remotecontrol-express.com - TEL : +44 (0) 207 399 7782 - FAX : +44 (0) 207 927 3151
CARDIN S449 QZ2 – S449 QZ4 – S449 QZ4M - S486 QZ2 - QZ4
Programming of your new remote control:
There are several methods for programming your new remote control.
From a remote control that has already been programmed:
1. Approach your motor so you are standing a few feet away from it.
2. With a sharply pointed object, press the hidden button from your already-programmed
remote control (diagram above, P1). The receiver emits a beep. Let the button go.
3. Press a button on your already-programmed remote control. The receiver emits a beep. Let
the button go.
4. Press the button you wish to program on your new remote control. The receiver emits 2
beeps. Let the button go.
5. Repeat this procedure for each button you wish to program.
6. Wait 10 seconds.
7. Your new remote control is programmed.

Summary

Programming Your New Remote Control

Program Using Existing Remote

Uses an already programmed remote to transfer settings to a new remote by pressing specific buttons in sequence.

Program Using Receiver

Involves accessing the receiver's circuit board, pressing a MEMO button, and then buttons on the new remote.

Cardin S449 QZ2 Specifications

General

Brand	Cardin
Model	S449 QZ2
Category	Remote Control
Language	English