Cardin S508 Series - User Manual

CARDIN ELETTRONICA S.p.A
Via del lavoro, 73 – Z.I. Cimavilla - 31013 Codognè (TV) Italy
Tel: +39/0438.404011 / Fax: +39/0438.401831
e-mail (Italy): sales.office.it@cardin.it
e-mail (Europe): sales.office@cardin.it
®
The S504 and S508 series, 433.92 / 868.3 MHz for all countries, conform to the essential
requirements of the directive 2014/53/EU and the technical reference standards have been applied.
MODEL
DATE
SERIAL Nr.
NAME
RPQ
504-508 T10
12.12.2019
ZVL679.00
RADIOPROGRAMMATORE PER SERRANDE E PORTE GARAGE AVVOLGIBILI
Messa in funzione ed uso pagine 2-10
Disegni tecnici d'installazione e riferimento pagine 47-49
RADIOPROGRAMMER FOR ROLLING SHUTTERS AND GARAGE DOORS
Set up and user instructions pages 11-19
Installation and reference drawings pages 47-49
RADIOPROGRAMMATEUR POUR VOLETS ROULANTS ET RIDEAUX DE GARAGE
Mise en service et utilisation pages 20-28
Dessins techniques d’installation et référence pages 47-49
FÜR ROLLGITTERN, ROLLTOREN UND GARAGENROLLTORE
Inbetriebnahme und Benutzung Seiten 29-37
Technische Installations- und Referenzzeichnungen Seiten 47-49
RADIOPROGRAMADOR PARA CIERRES ENROLLABLES Y PEURTAS DE GARAJE
Puesta en función y uso páginas 38-46
Dibujos técnicos de instalación y referencias páginas 47-49
www.cardin.it
ZVL679.00-MOD: 11-06-2020

Summary

Radio Programmer for Rolling Shutters and Garage Doors

Set Up and User Instructions

Electrical Connection and Safety

Mains Connection Requirements

Requirements for voltage, frequency, circuit breaker, and wiring.

Fuse and Low Voltage Connection Guidelines

Notes on fuse requirement and allowed connections for low voltage circuits.

Motor and Selector Switch Wiring

Motor and Power Supply Wiring

Dip-Switch Based Function Selection

Using dip-switch D1 to select functions for binding posts 7, 8, and 9.

Setting Work Cycle and System Management

Memorizing Channel Codes (First Press)

Procedure for memorizing Open, Stop, Close functions using the first S1 press.

Assigning Sequential Command

Assigning a sequential command to a transmitter channel using the second S1 press.

Cancelling Transmitters or Channels

Removing a transmitter or specific channels from the system using the fourth S1 press.

Resetting the Entire Memory

Procedure to clear all stored transmitter codes and settings.

Adding and Cloning Transmitters

Rapid Memorization Procedure

How to enable and use the rapid memorization procedure for adding new transmitters.

Remote Transmitter Cloning Steps

Step-by-step guide to cloning transmitter settings using an existing transmitter.

Transmitter Battery Replacement

Channel Selection Procedures

Cardin S508 Series Specifications

General

Model	Cardin S508 Series
Category	Remote Control
Frequency	433.92 MHz
Coding Type	Rolling Code
Battery Type	CR2032
Material	Plastic
Color	Black
Number of Buttons	2