Cardin TXQ504C8 - User Manual

CARDIN ELETTRONICA S.p.A
Via del lavoro, 73 – Z.I. Cimavilla - 31013 Codognè (TV) Italy
Tel: +39/0438.404011 / Fax: +39/0438.401831
e-mail (Italy): sales.office.it@cardin.it
e-mail (Europe): sales.office@cardin.it
®
The S504 and S508 series, 433.92 / 868.3 MHz for all countries, conform to the essential
requirements of the directive 2014/53/EU and the technical reference standards have been applied.
MODEL
DATE
SERIAL Nr.
NAME
RPQ
504-508 T10
12.12.2019
ZVL679.00
RADIOPROGRAMMATORE PER SERRANDE E PORTE GARAGE AVVOLGIBILI
Messa in funzione ed uso pagine 2-10
Disegni tecnici d'installazione e riferimento pagine 47-49
RADIOPROGRAMMER FOR ROLLING SHUTTERS AND GARAGE DOORS
Set up and user instructions pages 11-19
Installation and reference drawings pages 47-49
RADIOPROGRAMMATEUR POUR VOLETS ROULANTS ET RIDEAUX DE GARAGE
Mise en service et utilisation pages 20-28
Dessins techniques d’installation et référence pages 47-49
FÜR ROLLGITTERN, ROLLTOREN UND GARAGENROLLTORE
Inbetriebnahme und Benutzung Seiten 29-37
Technische Installations- und Referenzzeichnungen Seiten 47-49
RADIOPROGRAMADOR PARA CIERRES ENROLLABLES Y PEURTAS DE GARAJE
Puesta en función y uso páginas 38-46
Dibujos técnicos de instalación y referencias páginas 47-49
www.cardin.it
ZVL679.00-MOD: 11-06-2020

Summary

Radioprogrammer for Rolling Shutters and Garage Doors

Set up and user instructions

Instructions for setting up and using the radio programmer for rolling shutters and garage doors.

Installation and reference drawings

Device Usage

Motor Control Capabilities

The radio programmer controls single-phase motors for automatic rolling shutters and rolling grills.

System Preparation and Setup

Device Installation

Electrical Connections

Mains Supply Verification

Ensure voltage and frequency match mains supply and a suitable circuit breaker is installed.

Fuse and Low Voltage Wiring

Requirement for a 6.3A fuse and guidelines for wiring low voltage circuits to specific binding posts.

Motor and Selector Switch Connections

Motor Wiring

Instructions for connecting motor phases and neutral wire to the device's binding posts.

Selector Switch Configuration

Setting the Work Cycle

Defining Travel Limits

Procedure for setting the closing and opening travel limits using the S1 button and dip-switch.

System Management Operations

Clearing Memory

Memorizing Channel Codes

Step-by-step guide to memorizing Open-Stop-Close functions for 2 or 4 channel remotes.

Cancelling Transmitters

Transmitter Synchronization

Rapid Memorizing Procedure

Enabling and using the rapid memorizing procedure to add new transmitters using an existing one.

Technical Specifications

Radio Programmer Specifications

Transmitter Specifications

Battery Replacement

TXQPRO Transmitter Battery Change

Cardin TXQ504C8 Specifications

General

Brand	Cardin
Model	TXQ504C8
Category	Remote Control
Language	English