To Next Page
R
Randall AndersonAug 12, 2025
Why is my Cardinal Health 20EFEECAA Laboratory Equipment unit running continuously?
- BbjacksonAug 12, 2025
Your Cardinal Health Laboratory Equipment might run continuously due to several reasons. There could be heavy frost accumulation, in which case you should defrost the unit. A dusty condenser might be the cause, so clean it with a dry brush or vacuum. Check for leaks around the door gasket; re-seat or replace it if worn. Ensure the temperature isn't set too cold and verify the optimum running temperature. Also, if the ambient air is over 43ºC (109ºF) or the unit is near heat sources, consider moving it to a different location.
General