Need help?Do you have a question about the Cardo Systems SMARTPACK and is the answer not in the manual?
General| Battery Life | 13 hours |
|---|---|
| Waterproof Rating | IP67 |
| Compatibility | Universal |
| Voice Activation | Yes |
| FM Radio | Yes |
| Intercom Connections | Up to 4 riders |
| Music Sharing | Yes |
| Mobile Phone Connectivity | Yes |
| GPS Connectivity | Yes |
| VOX | Yes |
| Parallel Audio Streaming | Yes |
| Battery Standby Time | 1 week |
| Audio Quality | HD |
| Range | 1.6 km |
| Intercom technology | DMC |
Turn the device on or off by pressing the power button for 1 second.
Start the Bluetooth pairing process by holding the button for 5 seconds.
Search for the device on your phone and confirm the connection.
Respond to a call by pressing a button or using voice command.
Confirm the device is operating in DMC (Dynamic Mesh Communication) mode.
Establish a new DMC group with all members initiating pairing.
Admin adds a new member to an existing DMC group.
Add a paired Bluetooth passenger to the DMC conversation.
Activate voice command recognition with a wake-up phrase or beep.
Ensure the device is in standard Bluetooth intercom mode.
Establish a direct Bluetooth intercom connection between two riders.
Connect a third rider to an existing two-way intercom session.
Connect a third rider to form a group.
Establish a four-way intercom conference call.
Restore the device to its original factory settings.
To Next Page