11
4G connectivity
Boss micro setup:
Use the WIFI access or the LAN port with temporary IP access to connect to the boss micro
and access the System administration
After the successful login navigate to the Network configuration in the main menu. If the
main menu doesn’t appear please open it up with a click on the “burger” icon in the upper left
corner.
Under Network config, you will find the actual status of the three available connection
interfaces. Where the 4G interface only shows if the connection status is:
• Up or Down, if service is connected or disconnected
• Network IP, provided by the service operator
For more settings navigate to the tab “Modem” in the Network config.
To Next Page
Loading...
