Need help?Do you have a question about the Carel uC2 and is the answer not in the manual?
General| Digital inputs | 4 |
|---|---|
| Analogue outputs | 2 |
| Protocols | Modbus RTU |
| EEV Driver | Yes |
| Protection Rating | IP20 |
| Serial ports | 1 RS485 |
| Measurement Range | Depends on connected sensors |
| Accuracy | Depends on connected sensors |
Key capabilities including temperature control, defrost management, fan speed, and alarm handling.
Step-by-step guide on how to program and save parameters using the unit's interface.
Illustrates the general connection diagram of the µC² controller and its expansion boards.
Diagrams showing how the µC² controller is integrated into a network system.
Diagram of an air/air unit with a single circuit, showing components and connections.
Diagram of an air/air unit with two circuits, illustrating its components and connections.
Diagram for an air/air unit with two circuits and a single condenser fan circuit.
To Next Page
