7
Connection via WIFI
boss’s local WIFI connection is suited for easy connection with local mobile or tablet
devices.
Note: This connection is not for connecting the boss to the internet.
To connect, scan using your device’s WIF for your unique boss device and connect directly.
By default the SSID is “boss-” followed by a 4 digit/character combination.
eg. uboss-xxxx*
Note: the *suffix is always the last 4 digits of the MAC address of the boss.
Password for the WIFI connection is: 12345678
Accessing from a PC might require to follow the advanced SSID settings to enter the WIFI
key instead of a PIN.
Once connected, either scan the QR code on the front of the boss:
or: open a browser and type https://qraccess/boss
Alternatively put https://uboss-****
in the address bar and enter.
(where **** represents the last
4 digits of the mac address)
Example: https://uboss-4756
Login as normal in the boss program with the username and password that was provided
to you.
To Next Page
Loading...
