Need help?Do you have a question about the Carel IROPZ485S0 and is the answer not in the manual?
General| Model | IROPZ485S0 |
|---|---|
| Type | Controller |
| Digital Inputs | 4 |
| Analogue Inputs | 2 |
| Buzzer | Yes |
| Protection Degree | IP20 |
| Communication Protocol | Modbus RTU |
| Input Voltage | 24 VAC/VDC |
| Operating Temperature | -10 to +50 °C |
| Storage Temperature | -20°C to +70°C |
| Relative Humidity | 10...90% RH non-condensing |
General warnings and precautions for installation and use of CAREL products.
Overview of the controller's main functions, operational modes, and characteristics.
Universal wiring diagrams for IR33 series controllers.
Universal wiring diagrams for DN33 series controllers.
Step-by-step installation and environmental considerations for the controller.
Detailed functions of each button on the controller keypad.
Procedure for setting the primary set point value.
Procedure for setting the secondary set point value.
Steps to modify frequent parameters (Type P).
Steps to modify configuration parameters (Type C or D).
Procedure for setting the controller's current date and time.
Procedure for configuring the controller's on and off times.
Procedure for calibrating the controller's temperature probes.
Comprehensive guide to operating the controller remotely.
Steps to activate, deactivate, and manage remote control use.
Essential parameters for initial controller setup.
Settings and usage of analogue probes, including calibration.
Enabling and configuring custom operating logic via parameter c33.
Parameter defining output function (control, alarm, timer).
Setting the output type to ON/OFF or PWM/Timer.
Defining activation points for outputs in various modes.
Parameter defining output hysteresis and control logic.
Choosing between ON/OFF and PID control modes.
Setting integral and derivative time constants for PID control.
Automatic process for tuning PID control parameters.
Description of the automatic program with multiple set points.
Adjusting set point based on outside temperature in cooling.
Comprehensive technical data for the controllers.
Further technical data including power, inputs, and outputs.
To Next Page
