Need help?Do you have a question about the Carel IRDR Series and is the answer not in the manual?
General| Series | IRDR |
|---|---|
| Category | Controller |
| Protection rating | IP20 |
| Input voltage | 24 VAC/DC |
| Communication | Modbus RTU |
| Humidity range | 10% to 90% RH (non-condensing) |
Using the controller with its default settings for various applications.
Adapting the controller for uses requiring different configurations.
Relays energize to signal generic, high, or low alarm conditions.
Methods for programming the controller using the remote control.
The primary set-point parameter used in all operating modes.
The chief configuration parameter determining the operating mode.
Defines the hysteresis for the St1 set-point.
Sets the absolute value for the low temperature alarm threshold.
Sets the absolute value for the high temperature alarm threshold.
Determines the hysteresis range for alarm activation and de-activation.
Enables advanced parameter customization beyond standard modes.
Guidance on selecting the appropriate starting mode for customization.
To Next Page
