36
¦ ¦
+--------------------+
INSCONF (MANUFACTURER BRANCH)
+--------------------+ Mask for clearing and for Default values setting in
¦- Special Proced. AL¦ Back-up memory.
¦ ¦
¦Configuration ¦
¦Installing? No¦
+--------------------+
RITACCEN (MANUFACTURER BRANCH)
+--------------------+ In this mask you can select the delay for the first
¦- Special Proced. AL¦ start-up.
¦Delay for the First ¦
¦Start: ¦
¦ 0000 seconds ¦
+--------------------+
RITALL (MANUFACTURER BRANCH)
+--------------------+ In this mask you can select a delay in the
¦- Special Proced. AL¦ detection of all overshot threshold alarms.
¦Delay of Overshot ¦
¦Threshold Alarm: ¦
¦ 0000 seconds ¦
+--------------------+
IDENTNUM (MANUFACTURER BRANCH)
+--------------------+ In this mask you can select the identification
¦- Special Proced. AL¦ number for supervisory network connection.
¦ Identification ¦
¦ Number : ¦
¦ 000 ¦
+--------------------+
REMOTO (MANUFACTURER BRANCH)
+--------------------+ In this mask you can activate the remote ON-OFF
¦- Special Proced. AL¦ (DIN8).
¦ ¦
¦Remote ON/OFF ¦
¦Enabled? No¦
+--------------------+
RITORNO (MANUFACTURER BRANCH)
+--------------------+ Setting of the delay in the automatic return to the
¦Automatic Return AL¦ menu mask. If you leave it in 0 position, there
¦to Menu Delayed for ¦ will not be the automatic return to the menu mask.
¦ ¦
¦ 000 seconds ¦
+--------------------+
NEWCOST (MANUFACTURER BRANCH)
+--------------------+ Setting of a personal manufacturer password, which
¦- New Password AL¦ is an alternative to the already existing one, but
¦Change Manufacturer ¦ which does not substitute it.
¦Password ¦
¦ 0000 ¦
+--------------------+
To Next Page
Loading...
