S&2ð
cod. Carel +030221826 rel. 2.0 dated 03/10/02
27
&RQQHFWLQJWKHDQDORJXHRXWSXWV
The pCO
2
provides up to six optically-isolated 0÷10V analogue outputs powered externally at 24Vac/Vdc. Fig. 4.6.1 shows the
connection wiring diagram; the 0V (zero) voltage of the power supply is also the reference for the voltage of the outputs.
24 Vac/Vdc
0 V
V
out
V
out
V
out
V
out
V
out
)LJ
Tab. 4.6.1 summarises the distribution of the analogue outputs according to the available versions.
YHUVLRQ QRDQDORJXHRXWSXWV
60$//
4
0(',80
4
/$5*(
6
7DE
When remoting the analogue inputs, the cross section of the leads must be as reported in the following table (Tab. 4.5.4.2)
VL]HPP
IRUXSWRPORQJOHDGV
VL]HPP
IRUXSWRPORQJOHDGV
0,25 0,5
7DE