Carestream CS 1200 - Quick Start Guide Manual

Refer to the User Guide on the DVD for more detailed information on camera and software functions and features
CS 1200 Quick Start Guide
Camera & Software Installation
1. Install the imaging software on the computer:
 • ToinstalltheKODAKDentalImagingSoftware,
 • U.S.usersseeKodakDigitalImagingSystem
Installation Guide (CS3000).
 • UsersoutsideofU.S.seetheKODAKDental
Imaging Software Installation Guide (9H2290).
 • ToinstallimagingsoftwareusingTWAINinterface,
seeyourimagingsoftwareuserguide.
2. InserttheIntraoralCameraInstallationWizardDVD
and follow the on-screen instruction.
Whenyouarepromptedwithfollowingpop-up,click
ContinueAnyway.
General Tips
• ReviewtheUserGuideformoredetailedinformationon
the camera and software features and functions.
• Installthecameraholder(instructionsintheUser
Guide).
1. Capture button
2. Reviewbutton(backward)
3. Reviewbutton(forward)
4. Powerbutton(LEDindicator)
5. Cable connection
6. Camera Lens
7. Push-pull connector
8. USBconnector
9. Camera holder
Preference Settings
OntheAcquisitioninterface,click to set the camera
and software options.
Use

General
Preference tool to:
• Enable/Disableaudio
notications
• Adjustbrightnessand
contrast settings.
• Createaloglefor
fasterserviceresponse
• Sleepmode:cameraautomaticallygoesintosleepmode
when inserted into the camera holder or left idle for 1.5
minutes.Touseitagain,pickituporpresstheCapture
button.
• Automaticpowerdown:Cameraautomaticallypowers
off when idle for an hour.
•  Preferencebutton:Accessesthepreferences
dialog box.
Camera Overview
1
5
2
6
4
3
7
8
9