System Settings
-Parking Guard
Default setting: Off
When this function is enabled, the camera will automatically enter parking
mode whenever it is shut down. When parking mode is enabled and a
collision is detected, the dash cam will turn on and begin recording a 20
second video clip, which it will then lock to prevent overwriting.
-Car Number
Default setting: Off
Set the car number A/A/B/C/D/E/F/*/then captured images (works similarly
to the Date Stamp function in the Video Menu).
Press twice to open the Setup Menu (in Video Recording Mode,
you must first stop recording, done by pressing OK).
-Auto Power Off
Default setting: Off
When enabled, this feature allows the device to shut down after a period of
time in which the camera isn’t recording.
-Screen Saver
Default setting: Off
Specifies the duration for which the display will stay on after the device is
powered on. Having this setting disabled (default) will keep the display on
constantly, though you may manually toggle it with the button.
-Frequency
Default setting: 50Hz
Power supply specification used in your country or geographical region.
- 14 -
To Next Page