Need help?Do you have a question about the Carimali F22 Series and is the answer not in the manual?
Allows resetting of dose counters and related machine data.
Access and modify core machine configuration settings.
Process for updating the machine's operating software.
List and descriptions of alarms specific to F10 models.
List and descriptions of alarms specific to F20 models.
Procedure to update machine software from a cyber card.
Process for loading new software onto a cyber card.
Restore all setup values and counters to factory defaults.
Diagnosing and resolving the "Too Much Coffee" alarm.
Diagnosing and resolving the "Motor Time Out" alarm.
Diagnosing and resolving "Optical Sensor" related alarms.
Diagnosing and resolving "Motor Block" alarms.
Diagnosing and resolving "Level Probe" alarms.
Diagnosing and resolving "Boiler Minimum Level" alarms.
Diagnosing and resolving "Boiler Filling" alarms.
Diagnosing and resolving "Turbine" or flow meter errors.
Diagnosing and resolving "Infusion Time Out" alarms.
Diagnosing and resolving "Water Softener" alarms.
Addressing "Group Maintenance" alarms.
Addressing "Tools Maintenance" alarms.
Diagnosing and resolving "Corrupted Data" alarms.
Diagnosing and resolving "Clock Error" alarms.
Understanding and addressing safety valve operation issues.
Adjusting the steam boiler pressure to the correct range.
Adjusting the coffee dispensing pressure (pump pressure).
Adjusting the coffee grinder's settings for desired fineness.
Adjusting the coffee outlet flow rate and cream amount.
General| Water Tank Capacity | 5 L |
|---|---|
| Pump Pressure | 15 bar |
| Bean Hopper Capacity | 1.2 kg |
| Voltage | 220-240 V |
| Frequency | 50/60 Hz |
| Coffee Groups | 2 |
| Hot Water Outlets | 1 |
| Group Heads | 2 |
| Steam Boiler | Stainless Steel |
| Power Consumption | 2800 W |
| Material | Stainless Steel |
To Next Page