EN
Si
ned for and on behalf of Carlisle Fluid
Technologies UK Ltd:
D Smith
Director of Sales (EMEA)
27/6/18
Bournemouth,BH11 9LH,UK
EU Declaration of Conformity
This Declaration of conformity / incorporation is issued under the sole responsibility of the
manufacturer:
Machinery Directive 2006/42/EC
ATEX Directive 2014/34/EU
by complying with the following statutory documents and harmonized standards:
EN ISO 12100:2010 Safety of Machinery - General Principles for Design
EN 12621:+A1:2010 Machinery for the supply and circulation of coating materials under pressure - Safety
requirements
EN 1127-1:2011 Explosive atmospheres - Explosion prevention - Basic concepts
EN 13463-1:2009 Non electrical equipment for use in potentially explosive atmospheres - Basic methods and
requirements
EN 13463-5:2011 Non electrical equipment for use in potentially explosive atmospheres - Protection by
constructional safety "c"
Providing all conditions of safe use / installation stated within the product manuals have been complied with and
also installed in accordance with any applicable local codes of practice.
Product Description / Object of Declaration:
Pumps - Maple, DVP, 104009, 104010/LS, 104016,
104027, 104032, 104040/1/2, 104077, 104020,
104023, 104025, 104028/9, 106933, 104205,104149-
52, 104207-15, 104147.
This Product is designed for use with: Solvent and Water based materials
Suitable for use in hazardous area: Zone 1
Protection Level: II 2 G X IIB T4
Notified body details and role: Element Materials Technology (0891)
Lodging of Technical file
This Declaration of conformity / incorporation
is issued under the sole responsibility of the
manufacturer:
Carlisle Fluid Technologies UK Ltd,
Ringwood Road,
Bournemouth, BH11 9LH. UK
77-3233 R4.3 2/20 www.carlisleft.com
To Next Page
Loading...
