Carlson Boretrak2 Quick Start Guide

BT2 Quick start operational guide Page | 15
If you have not moved the alignment jig since the previous alignment, you can use the same
heading as before.
Otherwise, re-position the alignment jig along a new line of known heading.
Now continue to the next deployment.
Tap Use Existing and select
the previous alignment from the
drop-down list
Enter the new heading
and tap Finish to confirm
the alignment.

Carlson Boretrak2 Specifications

General

Brand	Carlson
Model	Boretrak2
Category	Measuring Instruments
Language	English