BT2 Quick start operational guide Page | 16
7 Check data
When readings are taken while the probe is inside the hole there will usually be no Bluetooth link
between the probe and the tablet. During this time, the hole readings represented in the 3D View
are just ‘placeholders’, which will be overwritten when Bluetooth connection is re-established.
Once the Bluetooth link has been re-established and data has downloaded from the probe…
After the probe is recovered for the last time, always ensure that you allow the probe time to
connect to the tablet to download the final set of stored data. In the Project tab there must
be no Deployments left showing a yellow warning triangle.
The hole flashes
yellow in the 3D View.
The Deployment
icon in the Project
tab displays a
yellow warning sign.
The hole is shown as
solid grey.
The Deployment icon
reverts to normal.
To Next Page
Loading...
Need help?
General
