Need help?Do you have a question about the Carlyle 06EA575 and is the answer not in the manual?
General| Brand | Carlyle |
|---|---|
| Model | 06EA575 |
| Category | Air Compressor |
| Language | English |
Detailed descriptions of key compressor features like valving, pistons, oil pump, and motors.
Tables listing detailed specifications for 06D/E compressors, including dimensions and electrical data.
Overview of compressor applications and operating condition limits.
Explains how capacity and power ratings are determined and software tools.
Details on proper system piping design to ensure lubrication and prevent issues.
Discusses the causes and effects of liquid refrigerant in the compressor and mitigation.
Importance of control strategies for reliability, limiting starts, and using safety switches.
Emphasizes the criticality of clean and dry systems, especially with HFCs and POE lubricants.
Guidelines to prevent overheating by controlling compression ratio and suction gas temperature.
Recommendations for connecting multiple compressors in parallel, including oil equalization.
Guidelines for selecting compressors, considering motor overloading and pulldown conditions.
Importance of proper wiring and electrical connections, with recommended bulletins.
Importance of lubrication, oil loss causes, and effects of over/under charging.
Lists approved oils for CFC/HCFC and HFC/POE refrigerants.
How unloading affects refrigerant flow and oil return, and control strategies.
Defines operating ranges for capacity control based on refrigerant and temperature.
Advice on avoiding short-cycling with continuous or automatic pump-down control.
Recommendations for setting the unloader differential to prevent short cycling.
Table for estimating part load performance using multiplication factors.
Use of VFDs for capacity control, efficiency, and operational limitations.
Overcurrent and overtemperature protection for 06D motors, including UL/CSA compliance.
Requirements for applying calibrated circuit breakers for 06E motor protection.
Approved oil safety switches and their specifications for compressor protection.
Availability and requirements for suction cut-off capacity control.
To Next Page
