Need help?Do you have a question about the Carlyle 06DA824 and is the answer not in the manual?
General| Brand | Carlyle |
|---|---|
| Model | 06DA824 |
| Category | Air Compressor |
| Language | English |
Detailed technical specifications for 06D/E compressors operating at 60 Hz, including dimensions and electrical data.
Detailed technical specifications for 06D/E compressors operating at 50 Hz, including dimensions and electrical data.
Emphasizes the importance of correct control and protection strategies for compressor reliability and longevity.
Highlights the critical need for clean and dry systems, especially with new refrigerants and lubricants.
Discusses the importance of keeping discharge gas and oil temperatures within allowable limits.
Guides on selecting compressors with proper allowance for abnormal conditions that may cause motor overloading.
Stresses the importance of proper wiring and electrical connection tightening for compressor reliability.
Explains the necessity of adequate lubrication for compressor operation and the consequences of low or excessive oil charges.
Specifies application ranges and limits for capacity control based on refrigerant, temperature, and cylinder count.
Describes the operation of electric solenoid capacity control valves, including loaded and unloaded states.
Explains the operation of pressure-operated capacity control valves, driven by suction and discharge pressure differentials.
Details how to adjust the control set point and differential for pressure-actuated unloader valves.
Discusses the use of VFDs for capacity control, efficiency, and potential operational considerations.
Covers inherent motor protection features and requirements for 06D compressors, including overloads and circuit breakers.
Details motor protection requirements for 06E compressors, emphasizing calibrated circuit breakers and their selection.
Lists approved oil safety switches for 06D/E compressors and explains their function in protecting against lubrication loss.
Introduces suction cut-off unloading as an option for 4 and 6-cylinder 06D/E compressors and its application requirements.
To Next Page
