Carpigiani K 3 User’s guide
This manual is for the exclusive use of licensees and employees of McDonald’s Systems Inc Page 27 of 63
Version 5: October 2012
.
3.1.4 PREPARING THE MACHINE FOR THE OVERNIGHT HEAT TREATMENT CYCLE.
a) Open the hopper cover to verify the mix level.
b) Fill the hopper with McD shake mix to the Max level. The “ADD MIX” message on the display must be off.
c) Keep the machine in PROD mode.
WARNING
If the mix in the hopper is below the medium level ("ADD MIX" MESSAGE ON DISPLAY), the pasteurisation cycle
will not start.
The heat treatment cycle is automatic and starts during the night (set time).
Both sides of the machine should be in production mode to perform properly the heat-treatment cycle.
3.1.5 FRONT PANEL CLEANING
To clean the keyboard panel with a clean sanitized towel is recommended to lock the keys as follows:
Press
for 3 seconds, light will flash indicating that the front panel is now locked. Clean the front panel
and the keybord panel with a clean sanitized towel.
After cleaning press
for 3 seconds, to unlock the keyboard.
To Next Page
Loading...