8
Contents of package
1x
2x
2x
12x
1x
1x
1x
1x
1 Startlight
1 Adapter Unit
1 Shoulder connecting section
1 Shoulder complement
4 End pieces
12 Track section bolts
Instructions
Assembly instructions
1
2
3
The Startlight is connected to the Adapter Unit appropriately; this
can be positioned at any place within the racetrack.
Maintenance and care
1
To ensure a proper operation of the motor-racing circuit, all race-
track components should be regularly cleaned. Pull the plug prior
to cleaning.
1
Racetrack: Keep the track surface and track slots clean with a
dry cloth. Do not use any solvents or chemicals for cleaning. When
it is not in use, store the racetrack in a clean and dust-protected
location, preferably in the original cardboard box.
Important information
Carrera DIGITAL 124/132
EVOLUTION
Carrera DIGITAL 124/132
EVOLUTION
Please note that Evolution (analog system) and Carrera
DIGITAL 124/132 (digital system) involve two separate and com-
pletely independent systems. We hereby expressly indicate that
both systems must be kept separate when setting up the track, i.e.
no connecting rail from Evolution may be used together
with the con-
necting rail and
Control Unit
of the Carrera DIGITAL 124/132,
even if
only one of the two connecting rails (Evolution connecting rail or
Carrera DIGITAL 124/132 connecting rail and Control Unit) is at-
tached to the current supply. Furthermore, no other Carrera
DIGITAL 124/132 components (switches, electronic lap counter, pit
To Next Page
Loading...
Need help?
General
