Need help?Do you have a question about the Carrier 17M and is the answer not in the manual?
Essential safety advice for operating centrifugal liquid chillers, emphasizing judgement and precautions.
Warnings regarding electrical hazards, moving parts, and pressure systems.
Safe practices for handling, pressurizing, and storing refrigerants.
Cautions on equipment operation, line safety, and welding.
Information on instructions, job data, and system knowledge required.
Preliminary checks including cleaning, dehydration, and leak testing.
Verifying safety devices and lubricating drive train and compressor systems.
Procedures for inspecting system piping and field wiring.
Checks for turbine, water systems, and level controller settings.
Steps for charging refrigerant and performing alignment checks.
Ensuring all safety controls are properly set and functional.
Calibrating the load limiting control for motor-driven units.
Preparing compressor oil, including heating and quenching.
Adjusting damper/labyrinths and performing final pre-start checks.
Procedures for starting the machine and checking its operation.
Includes hot alignment, stopping, and adjusting refrigerant charge/levels.
General information, lubrication, and control settings for pumpout units.
Evacuation, transfer, and distillation steps for 5F pumpout units.
Evacuation, transfer, and pressurization steps for 6D hermetic units.
To Next Page
General
