To Next PageTo Next Page
Need help?Do you have a question about the Carrier 30RBP-170R and is the answer not in the manual?
Outlines electrical data including voltage, current, power, and start-up current for 30RB models.
Details electrical specifications like voltage, current, power, and start-up current for 30RBP models.
Presents electrical data including voltage, current, power, and start-up current for 30RQ models.
Outlines electrical data such as voltage, current, power, and start-up current for 30RQP models.
Provides data on short-circuit withstand currents for different unit models and systems.
Specifies requirements for the unit's power supply, including voltage and phase imbalance limits.
Explains how to check and calculate voltage phase imbalance and its acceptable limits.
Describes the single connection point for power and the disconnect switch.
Offers guidelines for selecting appropriate cable sizes based on installation factors and regulations.
Details procedures for setting nominal water flow rate for units without a hydraulic module.
Details procedures for setting nominal water flow rate for units with fixed-speed pumps.
Lists essential checks and precautions to be taken before initiating system start-up.
Provides guidelines for the commissioning process, emphasizing safety and supervision.
Highlights critical checks for compressors, hydraulic systems, and refrigerant charge before start-up.
Outlines three levels of maintenance, from basic user checks to expert tasks.
Checklist for preliminary information, equipment details, and shipping damage verification.
Covers checks for unit start-up, water loops, pressure drops, and temperature/pressure readings.
Instructions for performing a QUICK TEST and logging user menu configuration parameters.
General