Carrier 23XL - Page 3

FRONT VIEW
REAR VIEW
Fig.2—Typical 23XL Installation (Frame 1 and 2 Machines)
1—Power Panel
2—Local Interface Display (LID) Control Center
3—ASME Nameplate, Cooler
4—Cooler Refrigerant Isolation Valve
5—ASME Nameplate, Economizer (Hidden)
6—Service Valve
7—Take-Apart Rabbet Fit Connector (Lower)
8—Cooler Temperature Sensor
9—ASME Nameplate, Condenser
10 — Typical Waterbox Drain Port
11 — Cooler Supply/Return End
Waterbox Cover
12 — Condenser Supply/Return End
Waterbox Cover
13 — Compressor Nameplate (Hidden)
14 — Oil Separator
15 — ASME Nameplate, Muffler (Hidden)
16 — ASME Nameplate, Oil Separator
17 — Cooler Relief Valves (Hidden)
18 — Oil Sump Filter Assembly
19 — Oil Charging Valve
20 — Vessel Separation Feet
21 — Float Chamber
22 — Condenser Isolation Valve (Option or
Accessory)
23 — Refrigerant Charging Valve
24 — Condenser
25 — Condenser Relief Valves (Hidden)
26 — Take-Apart Rabbet Fit Connector
(Upper)
27 — Unit Mounted Starter (Option)
28 — Machine Identification Nameplate
3