EasyManua.ls Logo

Carrier 30AWH004H - User Manual

Carrier 30AWH004H
160 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Aqua SNAP PLUS reversible INVERTER
¼É
Installation Manual
Question and Answer IconNeed help?

Do you have a question about the Carrier 30AWH004H and is the answer not in the manual?

Carrier 30AWH004H Specifications

General IconGeneral
BrandCarrier
Model30AWH004H
CategoryAir Conditioner
LanguageEnglish

Summary

INSTALLATION

SITING THE UNIT

Guidelines for selecting an optimal location for the outdoor unit to ensure proper operation and minimize disturbance.

WATER CONNECTIONS

Instructions for connecting the water pipes to the unit, including necessary components and considerations.

ELECTRICAL CONNECTIONS

Procedures for making electrical connections to the unit, emphasizing safety and compliance with regulations.

POWER WIRING

Instructions for connecting the unit to the main power supply, covering voltage, frequency, and safety measures.

FILLING THE SYSTEM FLUSHING WATER AND AIR

Steps for filling the system with water and flushing out air to ensure proper hydraulic operation.

CHECKING FOR WATER LEAKS

Procedures to detect and identify any leaks in the water circuit after installation and filling.

CONFIGURING AND CHECKING THE SYSTEM

Final steps for configuring unit settings and performing system checks for optimal performance.

R-410 A - General info

Safety procedures

Units installation

DO NOT INSTALL IN A PLACE...

Specific locations and conditions to avoid during unit installation to prevent issues.

Electrical connections

DANGER Electrical shock can cause severe personal injury or death. These operations are carried out by qualified personnel only.

Critical safety warning about the severe risks of electrical shock and the necessity of qualified personnel for connections.

WARNING Make water connections before electrical connections. Make ground connection prior to any other electrical connections

Safety warning to perform water connections before electrical, and ground connection before all other electrical work.

WARNING This unit complies with Machinery Directive...

Compliance statement with directives and warnings regarding electrical safety and adherence to national codes.

Servicing and maintenance

Dimensions and Clearances

Technical data

Installation

Water connections

Auxiliary accessories connection

Terminal strip pin

System test

Inverter board alarm codes (only for 30 AWH012_)

Guide to interpreting LED indications on the inverter board for diagnosing errors in the 30AWH012_ model.

Inverter board alarm codes (only for 30 AWH015_)

GMC Board Alarm Codes

Unit protection devices

Maintenance

Refrigerant charge check

Related product manuals