Need help?Do you have a question about the Carrier 30AWH015HB and is the answer not in the manual?
Essential safety measures and guidelines for handling the unit.
Explains symbols and their meanings used in the manual.
Provides general notes on installation, maintenance, and liability.
Guidelines for choosing an appropriate installation location.
Information about the integrated hydronic module.
Illustrates system configurations for heating applications.
Wiring diagram for the inverter control size 004HB.
Image and identification of the GMC controller.
Image and identification of the Inverter controller.
Lists inverter alarms and their corresponding LED indications.
Details error codes for 30AWH012 models.
Troubleshooting steps for enter water temperature sensor faults.
Troubleshooting steps for flow switch and water pump errors.
Troubleshooting steps for G-Tr short-circuit protection.
Troubleshooting steps for compressor lock conditions.
Troubleshooting steps for compressor breakdown.
Explains the use of dry contacts for controlling unit functions.
Installation instructions for the 33AW-RC1 remote controller.
Explains main settings and corresponding NUI codes.
Step-by-step guide for installing the NUI user interface.
Lists user functionalities and comfort settings.
Table of control codes, their names, descriptions, and ranges.
Introduction to pre-set heating and cooling curves.
Steps for checking and charging refrigerant correctly.
Procedure for cleaning the unit's coil.
Lists new tools required for R410A installation and servicing.
General| Model | 30AWH015HB |
|---|---|
| Refrigerant | R-410A |
| Phase | 1 |
| Voltage | 208/230V |
| Hertz | 60 Hz |
To Next Page