Carrier 30GT080-420 - Unit Mounting Weights (Approximate); Rigging Center of Gravity

*Points A, B, C, and D are in the corners of the unit. See Fig. 1 and 2 for dimensions.
60 Hz
30GT
UNIT SIZE
CONDENSER
COIL
lb kg
ABCDABCD
080,230B
C-AL 1624 1690 1666 1650 738 768 757 750
C-C 1797 1880 1847 1831 817 854 840 832
090,245B
C-AL 1817 1793 1720 1685 826 815 782 766
C-C 1997 1970 1893 1880 908 895 860 855
100,255B,270B
C-AL 2185 2185 2120 2120 993 993 964 964
C-C 2420 2420 2360 2360 1100 1100 1073 1073
110,290B,315B
C-AL 2191 2217 2136 2116 996 1007 970 962
C-C 2428 2454 2374 2354 1104 1115 1079 1070
50 Hz
30GT
UNIT SIZE
CONDENSER
COIL
lb kg
ABCDABCD
080,230B
C-AL 1650 1730 1680 1660 750 786 764 755
C-C 1830 1910 1863 1842 832 868 847 837
090,245B
C-AL 1833 1864 1724 1714 833 847 784 779
C-C 2014 2040 1907 1899 915 927 867 863
100,255B,270B
C-AL 2222 2222 2133 2133 1010 1010 970 970
C-C 2460 2460 2370 2370 1118 1118 1077 1077
110,290B,315B
C-AL 2271 2271 2149 2149 1032 1032 976 976
C-C 2508 2508 2387 2387 1140 1140 1085 1085
LEGEND
C-AL — Copper Tubing — Aluminum Fins
C-C — Copper Tubing — Copper Fins
NOTE: If spring isolators are used, a perimeter support channel between the unit and the
isolators is recommended.
RIGGING CENTER OF GRAVITY
30GT
UNIT SIZE
080,230B 090,245B 100,110,255B-315B
in. mm in. mm in. mm
X
Dimension
69.6 1768 87.8 2229 87.8 2229
Y
Dimension
42.0 1067 38.8 984 40.0 1016
Fig. 6 — Unit Mounting Weights (Approximate); 30GT080-110 and 230B-315B
8