NOTES:
1. Unit must have clearances as follows:
Top — Do not restrict.
Sides and End — 6 (1.8 m) from solid surface.
2. Temperature relief devices located on suction line, liquid line and fil-
ter drier of each circuit and have
1
/
4
flare connection.
3. Dimensions are in mm [inches].
4. Allow 8 ft (2.4 m) of service access on either side of unit for con-
denser coil removal.
LEGEND
HR — Heat Reclaim
MCHX — Microchannel Condenser Coil
Fig. 10 — 30RB130 Air-Cooled Chiller with Heat Reclaim Option Dimensions
a30-4737
To Next Page
Loading...
